I’ll tell you how to wrap badminton grips on my guests. And I’ll tell you how to use Underwrap. I know you already know, but I hope you compare it to my method. It is a Mueller tape that can be purchased for $ 2-3. On the other hand, it is called under wrap. This is absolutely necessary.
Wrapping a grip on a badminton racket You need to know the purpose of using Muller tape. Why do you use this? People using towel grip should be used. Like disposable underwear People who use rubber grips have a high sense of cushioning and It is used to increase the thickness of the handle. In case of me, I use it to adjust the thickness in part. It is also used to make the angle of the end cap gentle to make the grip tight. I’ll show you some ways to use it. First, there are people who roll like pussy hair. It is a form that wraps uniformly throughout. But I do not wrap it this way. I’ll show you how to wrap it now. In 2013, I uploaded YouTube videos and introduced this method. Fold up the Mueller tape in half. It is easy to pull and wrapping, and it is effective to adjust the thickness feeling in part. I’ll show you Muller taping for wrapping rubber grips. I start wrapping the rubber grip on the end cap. So the end of the Muller tapping must be done in the end cap. Muller taping will be distracted during wrapping of the rubber grip if it is tipped from the front. Let’s check the thickness of the grip. Many kinds, various price, various thickness feeling The grip I’m satisfied with has nothing to do with the price. The thickness of the rubber grip is also large. Thinner is good, but if you do not want to be hard, you can do muller taping. If you have a sense of cushion and thick enough, you do not have to mueller taping. Please hold your first wheel by hand. They do not resolve after overlapping. Pull tight and wrap. The feeling of cushion is maintained for a long time. There is a way to wrap from the front to the back and then back to the front again. There is also a method of overlapping and narrow lapping from the front. I do a lot of wrapping here. The shape is beautiful when you wrap the rubber grip. Muller tapes sometimes move from the end caps. You must wrap it over the end cap. Then, the Mueller tape wraps on the end cap is stably fixed. The rubber grip must be wrapping from the end cap. The rubber grip must point outward of the racket. In order for the rubber grip to be stably fixed At first, pull strongly. After overlapping, move to the front of the racket. If the rubber grip is lifted, pull it strongly. The middle part should not be pulled too much. This is because the performance of the rubber grip is deteriorated. I wrap up the back side a lot and do not overlap in the front. In high clear / smashing, it is held backwards. If it is wrong, unwrapping it and wrapping it again. The remaining part can be cut with scissors. Or you can unwrap it and wrap it up more narrowly. At this point, you have to pull strongly again to wrap. Each company has different lengths of rubber grip. Some people do taping finishing, some people just do not. When lapping towel grips, you have to use Mueller taping in a different way. Today, I will show you Muller taping only. I’ll show you how to wrap the towel grip on the next page. Towel grips start from the end cap and finish on the shaft side. So Mueller taping should be reversed. The towel grip does not open when the Mueller tape is pulled and wrapped.(gap open)